To Operate Your Cable Converter - Radio Shack 7-in-One Home Theater Owner's Manual

15-1935.fm Page 21 Thursday, December 31, 1998 11:37 AM
TO OPERATE YOUR CABLE
CONVERTER
Locate the codes for your cable converter in "Setup
Codes for Cable Converters" on Page 22 and write
them in the space below. The brands are listed in alpha-
betical order, with the most popular codes listed first.
Codes: _____________________________________
Follow these steps to program the 7-in-One to operate
your cable converter.
1. Turn on your cable converter.
2. Press .
CBL
3. Hold down
SETUP
4. Press . CODE SETUP appears.
MENU
5. Repeatedly press
6. Enter the first three-digit code listed for your con-
verter's brand, then press
7. Point the 7-in-One at the cable converter and press
. Your cable converter should turn off. If it
POWER
does not, enter the next code in the code list and
press then
SELECT
cable converter turns off, press
gramming.
Note: If your original cable converter remote does not
have an ON key, press
your cable converter.
Need help? Call 1-800-763-9232
until TIMED SEQ appears.
until CABLE appears.
SELECT
.
SELECT
again. When your
POWER
to stop pro-
ESC
on the 7-in-One to turn on
CH+
21