The Metal And Plastic Stuff Easy Assembly Instructions; Getting Started - Bounty Hunter TimeRanger Owner's Manual

Getting Started

Assembly
Assembling your Time Ranger™ is
easy and does not require any
tools. Using the following diagram
as your guide, just follow these
easy steps.
L To assemble the
Time Ranger™
1. Using the supplied bolt and
knurled knob, attach the search
coil to the lower stem.
2. Press the button on the upper end
of the lower stem and slide the
lower stem into the upper stem.
Adjust the stem to a length that
lets you maintain a comfortable
upright posture, with your arm
relaxed at your side.
3. Wind the search coil cable around
the stem. Leave enough slack in
the cable to let you adjust the coil
when you are hunting on uneven
ground. Then tighten the knob at
the end of the search coil.
TIP:
To adjust the coil, simply loosen
the knob.
4. Insert the coil's plug into the
matching connector on the con-
trol housing. Be sure the holes
and pins line up correctly.
CAUTION:
• Do not force the plug in.
Excess force will cause
damage.
• To disconnect the cable,
pull on the plug. Do not
pull on the cable.
10
Bolt
Bottom view
Lower
Stem
Search
Coil
Cable
Upper
Stem
Knurled
Knob
Search Coil
Lower
Stem
Upper
Stem
Bottom side
Plug
Control
Housing
Connector
on back of
control housing