Table of Contents
Advertisement
The oven lighting is not oper-
ating
The pyroluxe is not working In
the display C1-REMOVE RUN-
NERS appears
F11 appears in the clock display The meat probe has short cir-
F2 appears in the clock display
A fault code that is not listed
above appears in the clock dis-
play
WARNING!
Repairs to the appliance are only to be carried out by qualified service engineers. Consid-
erable danger to the user may result from improper repairs.
If the appliance has been wrongly operated, the visit from the customer service technician
or dealer may not take place free of charge, even during the warranty period.
Advice on cookers with metal fronts: because of the cold surface at the front of the cooker,
opening the oven door during (or just after) baking or roasting may cause the glass to steam
up.
The required settings have not
been set
The oven's automatic cut-out
has been triggered.
The house wiring fuse (in the
fuse box) has tripped
The oven light bulb is faulty
Side rails/oven shelf runners
have not been removed
cuted or the plug of the meat
probe is not firmly in position
in the socket
Door not closed properly or
door lock faulty
Electronic fault
What to do if...
Check the settings
See Automatic cut-out
Check fuse. If the fuses trip sev-
eral times, please call a quali-
fied electrician
Replace oven light bulb
Remove side rails/oven shelf
runners
Insert the meat probe plug into
the socket on the oven side wall
as far as it will go.
Close door properly; Switch the
appliance off and on again via
the house fuse or the safety
switch in the fuse box; If it is
displayed again, please contact
the Customer Care Department
Switch the appliance off and on
again via the house fuse or the
safety switch in the fuse box. If
it is displayed again, please
contact the Customer Care De-
partment
41
Advertisement
Table of Contents
