Set Date And Time - Lexmark X203n User Manual

Menu item
USB Buffer
Disabled
Auto
3K to <maximum size allowed>
Mac Binary PS
On
Off
Auto
USB With ENA
ENA Address
ENA Netmask
ENA Gateway

Set Date and Time

Menu item
View Date/Time
Set Date/Time
Yes
No
Description
Sets the size of the USB input buffer
Notes:
• Auto is the factory default setting.
•
The Disabled setting turns off job buffering. Any jobs already buffered on the
disk are printed before normal processing is resumed.
•
The USB buffer size value can be changed in 1‑K increments.
•
The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether the Resource Save setting is On
or Off.
• To increase the maximum size range for the USB Buffer, disable or reduce the
size of the parallel, serial, and network buffers.
• Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
•
Auto is the factory default setting.
•
The Off setting filters print jobs using the standard protocol.
• The On setting processes raw binary PostScript print jobs.
Sets the network address, netmask, or gateway information for an external print
server that is attached to the printer using a USB cable
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Description
Displays the time in YYYY‑MM‑DD HH:MM format
Note: This is a view only screen.
Instructs the printer to run the setup wizard
Notes:
• Yes is the factory default setting.
•
After completing the setup wizard by selecting Done at the Country/Region
select screen, the default becomes No.
Understanding printer menus
111