Finishing Menu - Lexmark X203n User Manual

Menu item
Print Area
Normal
Whole Page

Finishing menu

Menu item
Copies
1–999
Blank Pages
Do Not Print
Print
Collate
On
Off
N‑Up
Off
2 Up
4 Up
6 Up
9 Up
16 Up
N‑Up Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Description
Sets the logical and physical printable area
Notes:
• Normal is the factory default setting. When attempting to
print data in the non‑printable area defined by the Normal
setting, the printer clips the image at the boundary.
•
The Whole Page setting allows the image to be moved into
the non‑printable area defined by the Normal setting, but the
printer will clip the image at the Normal setting boundary.
•
The Whole Page setting affects only pages printed using a
PCL 5e interpreter. This setting has no effect on pages printed
using the PCL XL or PostScript interpreter.
Description
Specifies a default number of copies for each print job
Note: 1 is the factory default setting.
Specifies whether blank pages are inserted in a print job
Note: "Do Not Print" is the factory default setting.
Stacks the pages of a print job in sequence when printing multiple copies
Notes:
•
Off is the factory default setting. No pages will be collated.
•
The On setting stacks the print job sequentially.
•
Both settings print the entire job the number of times specified by the Copy
menu setting.
Specifies that multiple‑page images are printed on one side of a sheet of paper
Notes:
•
The number selected is the number of page images that will print per side
•
Off is the factory default setting.
Specifies how the page images appear on the physical page
Note: Horizontal is the factory default setting.
Understanding printer menus
103