E-Mailing; Getting Ready To E-Mail; Setting Up The E-Mail Function; Setting Up The Address Book - Lexmark X203n User Manual

E-mailing

ADF
Use the ADF for multiple‑page documents.
Note: The ADF is available on selected models only.
You can use the printer to e‑mail scanned documents to one or more recipients. There are three ways to send and e‑mail
from the printer. You can type the e‑mail address, use a shortcut number, or use the address book.

Getting ready to e-mail

Setting up the e-mail function

For e-mail to operate, it must be turned on in the printer settings and have a valid IP address or gateway address. To
set up the e-mail function:
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
2
Click Settings.
3
Click E-mail/FTP Settings.
4
Click E-mail Server Setup.
5
Change the e‑mail settings as needed.
6
Click Submit.

Setting up the address book

1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
2
Click Settings.
Scanner glass
Use the scanner glass for single pages, small items (such as postcards
or photos), transparencies, photo paper, or thin media (such as
magazine clippings).
E-mailing
58