To replace the component, reverse the removal procedure.
IMPORTANT:
devices. The batteries charge to:
•
•
Replacing the UPS
To remove the UPS:
Power down all attached load devices.
1.
Power down the UPS
2.
Unplug the UPS power cord.
3.
Disconnect all cabling.
4.
Remove the UPS front bezel
5.
Charge the batteries for at least 24 hours before supplying backup power to
80 percent of their capacity within 3 hours
100 percent of their capacity within 48 hours
("Powering down the
("Removing the UPS front
UPS" on page 34).
bezel" on page 37).
Maintenance 41