Replacing Ups Internal Batteries - HP R3000v User Manual

UPS MAINTENANCE
28
HP R3000v UPS User Guide

Replacing UPS Internal Batteries

The UPS internal batteries are heavy. Use caution when handling the heavy batteries.
The internal batteries are located behind the UPS right front bezel. The internal batteries are
packaged together as one unit for easier handling.
To replace the UPS internal batteries:
1. Remove the UPS right front bezel (see Figure 20).
To remove the bezel, loosen the two captive screws on the right side of the bezel.
Grasp the top and bottom of the bezel and slide the bezel to the right.
NOTE: A ribbon cable connects the control panel to the UPS. Do not pull on the cable or
disconnect it.
2. Disconnect the internal battery connector (see Figure 21).
Figure 21 Disconnecting the UPS Internal Batteries (Shown without ERMs)
S 164201731 Rev 1
C A U T I O N
NOTE: Leave
ribbon cable
connected.
Figure 20 Removing the UPS Right Front Bezel
Battery Cover Plate
Internal Battery
Connector