Power Protection Specifications; Voltage Specifications; Output Tolerance Specifications; Output Feature Specifications - HP R5000 User Manual

UPS model
R5000 INTL
1 The circuit breakers protect the C19 and C13 outlets.
If an extension bar is connected to a C19 receptacle, the maximum current for each C13 receptacle on the extension
2
bar is 10 A. The total maximum current for the extension bar is 12 A.

Power protection specifications

UPS model
R5000 NA/JPN
R5000 INTL

Voltage specifications

Configuration setting (VAC)
200/208
220
230
240

Output tolerance specifications

Source of power
Utility power (nominal
range)
Battery power

Output feature specifications

Feature
Online efficiency
Voltage wave shape
Load Circuit
segment breaker
2 20 A¹
1 20 A¹
2 20 A¹
VA Nominal power
rating (W)
5000 4500
5000 4500
Available nominal output voltage
(VAC)
204
220
230
240
Regulation
-10% to +6% of nominal output voltage rating
(within the guidelines of the Computer Business
Equipment Manufacturers Association)
±5% of nominal output voltage rating
Specification
94% nominal input voltage
Sine wave; 5% THD with typical PFC load
Output receptacles Maximum current
2 x IEC-320-C19 16 A per receptacle²
2 x IEC-320-C13 10 A per receptacle
2 x IEC-320-C19 16 A per receptacle²
2 x IEC-320-C13 10 A per receptacle
1 x IEC-309-32A Up to full UPS power rating
2 x IEC-320-C19 16 A per receptacle²
2 x IEC-320-C13 10 A per receptacle
Nominal voltage
setting
200/208, 220,
230, 240
200/208, 220,
230, 240
Specifications 51