Installing The Ups; Connecting The Battery Leads - HP R5000 User Manual

Installing the UPS

Before installing the UPS, review and observe all warnings in "Precautions (on page 11)."
WARNING:
equipment in the rack might cause the rack to become unstable. Install the heavier components
first, and then continue to populate the rack from the bottom to the top.
Install the mounting rails
1.
With one person on each side of the carton, lift the chassis and lower it to the floor in front of the rack.
2.
Install the mounting ears on the chassis using the screws provided.
3.
With one person on each side, lift the chassis to rail level and slide the chassis on the mounting rails. Be
4.
sure that the cleat brackets slide into the channels on the rear stabilization brackets.
Attach the chassis to the rack using the supplied screws.
5.

Connecting the battery leads

WARNING:
the battery lead labels before connecting the battery leads.
A risk of personal injury or damage to the equipment exists. Uneven loading of
("Installing the mounting
To prevent personal injury from electric shock or damage to the equipment, remove
rails" on page 12).
Installation and configuration 17