Lanier 5618 Operator's Manual page 96

Digital copier
Table of Contents

Advertisement

Copy Paper
Copy Quantity
Copy Size Keys
Darker Copies
Developer Material
Developer Unit
Document Feed Tray
Document Guide
Document Receiving
Tray
Document Scale
Documents
Drum Assembly
Energy Saver Key
G-2
See: paper
This display or part of a Touch Screen shows the requested number of
copies.
Keys used to input the desired size of the copy.
This term refers to the amount of toner placed on the copy through the
imaging process. The amount of toner is controlled by the "darkness" of
the original and the amount of light used during the exposure process;
more light means less toner or image density.
This is a supply used in the copier. It usually consists of two parts; a
carrier material and the toner. The developer material is only used by a
technician when installing a new unit or when cleaning a Developer Unit.
An assembly located near the drum inside the copier that delivers the
toner to the drum. It allow the correct amount of toner to be placed on the
drum for each image.
The Tray where an original document is placed to feed into an ADF for
automatic feeding and copying.
These Guides are located in the Document Feed Tray. When correctly
positioned against the sides of an original document, they help to position
the pages of the document.
A Tray used to accumulate the pages of an original document that have
completed the copying process.
Two scales located to the front and left of the Exposure Glass intended to
help locate original documents placed on the Glass for manual copying
and to identify a part of an original during the Editing process.
The set of pages either placed on the Exposure Glass or in the ADF to be
copied.
The unit located inside the copier that receives the image during the
exposure and imaging process and transfers this image to the copy paper.
It is light sensitive and should be protected from bright lights.
A Key used to place the copier into, or bring it out of an Energy Saver
Mode. In the Energy Saver Mode, the amount of energy consumed by the
copier is reduced.

Advertisement

Table of Contents
loading

Table of Contents