Lanier 5618 Operator's Manual page 70

Changing Paper Size
6
7
8
9
10
6 - 4
Square the paper and set it in the tray.
While pressing the release lever, adjust the
side and back paper guides to the new paper
size.
Note: When setting small quantities of
copy paper, be careful not to squeeze in
the side paper guides too much or paper
will not be fed properly.
Press down the lock button.
Adjust the tray size with the paper size
selector to the new paper size.
Note: If you cannot find your desired
paper size, select "*", then set the copy
paper size with the "11 Special Pap.Size"
setting in the System Settings.
Push the paper tray in until it stops.
Service and Supplies