Cleaning The Copier; Cleaning The Machine; Cleaning The Exposure Glass; Cleaning The Document Feeder Belt - Lanier 5618 Operator's Manual

Cleaning the Copier

Cleaning the Copier

A dirty Exposure Glass or Document Feeder Belt may have an effect on the quality of your
copies. Inspect them and clean as necessary.

Cleaning the Machine

Wipe the copier with a soft, damp cloth and then dry it.
Do not use chemical cleaner or organic solvent, such as thinner or benzene. If they get into the
copier of melt plastic parts, a failure might occur.
Do not clean parts other than those specified in this Operator Guide. Such parts should be cleaned
by your service representative.

Cleaning the Exposure Glass

Clean the Exposure Glass using a clean dry cloth.

Cleaning the Document Feeder Belt

Clean the Document Feeder Belt using a dry clean
cloth.
6 - 12 Service and Supplies