Repertory Dialing - Fujitsu CT-10 User Manual

REPERTORY DlALlNG
This feature lets you use a single button to make a call. The phone
must have a programmable repertory dialing button(s). You can
assign any number (up to 20 digits, O-9,
l
, or #) to the repertory dialing
button and the system dials it automatically.
To program a number for Repertory Dialing:
1. Lift the handset.
- Listen for dial tone.
2. Dial 6 2.
3. Press a repertory dialing button.
- The repertory dialing /amp lights.
4. Dial the number to be programmed (twenty digits maximum).
5. Press the repertory dialing button.
- Listen for success tone.
The
repertory dialing
/amp goes dark.
To place a call via Repertory Dialing:
1. Lift the handset.
- Listen for internal dial tane.
2. Press the repertory dialing button.
- The system dials the number automatically.
NOTE
When programming Repertory Dialing, the following buttons can
also be used:
1
' .
..*
"-.
-.
SAVE/REPEAT: This button creates a pause when pressed
during Repertory Dialing programming.
FLASH: This button creates a hookswitch flash
during programming for use over outside
telephone networks.
85