Callprocessingfeatures; Call Announce - Fujitsu CT-10 User Manual

CALLPROCESSINGFEATURES
CALL ANNOUNCE
Call
Announce lets you do the following from one CT telephone to
another:
l
Transfer a call.
0 Place a call.
Call Announce also lets you announce the call over the speaker on the
called party's instrument. The called party hears a distinctive call
announce tone (zip tone) and can respond without lifting the handset if
the CT telephone is programmed for this feature.
To transfer a call using Call Announce:
1. Ask the party on the line to wait.
2.
Press the
TRANSFER
button.
- The TRANSFER lamp lights in a steady pattern.
- Listen for key tone.
3. Dial the extension number.
4.
Press the
call announce
button.
- The call announce lamp lights in a steady pattern.
- Listen for success tone.
5. Announce the call.
-
The
called party
receives
a
zip tone
and
information displays.
Your voice is then heard over the called patty's speakerphone.
- The called party can respond by lifting the handset or using the
SPEAKER button.
6. Hang up.
- The called telephone rings with the transferred call.
33