HP 4800G Series Configuration Manual page 1292

Table of Contents

Figure 1-11 Configure Layer 3 portal authentication

20.20.20.1/24

Configuration procedure

You need to configure IP addresses for the devices as shown in

are available between devices.

Perform configurations on the RADIUS server to ensure that the user authentication and

accounting functions can work normally.

Configure Switch A:

Configure a RADIUS scheme

# Create a RADIUS scheme named rs1 and enter its view.

<SwitchA> system-view

[SwitchA] radius scheme rs1

# Set the server type for the RADIUS scheme. When using the iMC server, you need set the server type

to extended.

[SwitchA-radius-rs1] server-type extended

# Specify the primary authentication server and primary accounting server, and configure the keys for

communication with the servers.

[SwitchA-radius-rs1] primary authentication 192.168.0.112

[SwitchA-radius-rs1] primary accounting 192.168.0.112

[SwitchA-radius-rs1] key authentication radius

[SwitchA-radius-rs1] key accounting radius

# Specify that the ISP domain name should not be included in the username sent to the RADIUS server.

[SwitchA-radius-rs1] user-name-format without-domain

[SwitchA-radius-rs1] quit

Configure an authentication domain

# Create an ISP domain named dm1 and enter its view.

[SwitchA] domain dm1

192.168.0.100/24

Portal server

192.168.0.111/24

20.20.20.2/24

RADIUS server

192.168.0.112/24

and ensure that routes

Chapters

Table of Contents