HP 4800G Series Configuration Manual page 1659

# Create a local user named guest and enter local user view.
[Sysname] local-user guest
# Set the authentication password to 123456 (in plain text).
[Sysname-luser-guest] password simple 123456
# Set the service type to Terminal.
[Sysname-luser-guest] service-type terminal
[Sysname-luser-guest] quit
# Enter AUX user interface view.
[Sysname] user-interface aux 0
# Configure to authenticate the user logging in through the Console port in the scheme mode.
[Sysname-ui-aux0] authentication-mode scheme
# Set the baud rate of the Console port to 19200 bps.
[Sysname-ui-aux0] speed 19200
# Set the maximum number of lines the screen can contain to 30.
[Sysname-ui-aux0] screen-length 30
# Set the maximum number of commands the history command buffer can store to 20.
[Sysname-ui-aux0] history-command max-size 20
# Set the timeout time of the AUX user interface to 6 minutes.
[Sysname-ui-aux0] idle-timeout 6
2) Configure the authentication scheme
Configure the authentication server by referring to related parts in AAA Configuration.
After the above configurations, you need to modify the configurations of the terminal emulation utility
running on the user PC accordingly, as shown in Figure 2-4, thus ensuring the consistency between the
configurations of the terminal emulation utility and those of the switch. Otherwise, you will fail to log in to
the switch.
2-11