General Setup Menu - Yamaha DVX-1000 Owner's Manual

DVD setup menu options
This setup is carried out via the TV,
enabling you to customize the DVD
receiver to suit your particular
requirements.
Notes
– To return to the previous menu, press .
– To exit from the menu, press SET UP.
– If the settings you have selected are not
appropriate, you can reset all settings to the initial
factory settings (see "Restoring to the factory
defaults" on page 43).

■ General setup menu

1 In DVD/CD mode, press SET UP.
2 Press
/ to select [GENERAL SETUP PAGE].
3 Press ENTER to confirm.
GENERAL SETUP PAGE
DISC LOCK
PROGRAM
OSD LANGUAGE
SCREEN SAVER
AUTO STANDBY
DIVX(R) VOD CODE
Locking/Unlocking discs for viewing
Not all discs are rated or coded by the manufacturer of the
disc. You can prevent playback of a specific disc by
locking the disc. You can lock up to 40 discs on this unit.
1 In [GENERAL SETUP PAGE], press
highlight [DISC LOCK], then press
LOCK
Select this to block playback of the current disc.
Subsequent access to a locked disc requires a six-digit
password. The default password is '000 000' (see
"Changing the password" on page 43).
UNLOCK
Select this to unlock the disc and allow future
playback.
2 Press
/ to select a setting and press ENTER
to confirm.
34
En
Programming disc tracks (except
picture CD/MP3/WMA/DivX
You can playback the contents of a disc in the order you
want by programming the tracks to be played. You can
store up to 20 tracks.
1 Press PROG on the remote control, or in [GENERAL
SETUP PAGE], press
[PROGRAM], then press
MENU].
2 Press ENTER to confirm.
To program your favorite tracks/chapters
3 Use the numeric keypad (0-9) to enter a valid
track/chapter number.
4 Use
position.
If the track number is more than ten, press a to
open the next page and proceed with programming, or
use
program menu, then press ENTER.
5 Repeat steps 3 and 4 to input another track/chapter
number.
To remove a track
/ to
.
6 Use
track you want to remove.
7 Press ENTER to remove this track from the program
menu.
8 To exit the menu, press PROG. Or use
ENTER to confirm.
/
to select [INPUT
PROGRAM: TRACK (01-17)
6 _ _
1 04
2 10 7 _ _
3 _ _
8 _ _
4 _ _ 9 _ _
10 _ _
5 _ _
EXIT START
/ / / to move the cursor to the next
/ / / to highlight [NEXT] on the
/ / / to move the cursor to the
to move the cursor to select [EXIT], then press
®
discs)
to highlight
NEXT
/ / /