Connecting External Av Components - Yamaha DVX-1000 Owner's Manual

Other connections

■ Connecting external AV components

If you connect external AV equipment such as a VCR, cassette deck or digital audio component to the following audio
terminals on the DVD receiver, you can enjoy those audio sources with the DVD receiver. Also, you can record AV
sources played on the DVD receiver using the recording equipment. This section provides some examples of other AV
equipment connections. For information on your AV equipment, refer to the manual provided.
Viewing and listening to playback
1 Connect the DVD receiver's VIDEO output jack to
the VIDEO IN jack on your VCR. Or, connect the
VCR to the TV as shown.
2 Connect the DVD receiver's AUX IN jacks to the
AUDIO OUT jacks on your VCR.
Before starting operation, press AUX to select
"ANALOG" in order to activate the input source.
18
En
1
Y
AUX IN LINE OUT
AL IN
P
B
CAL L L
P
R R R
/DTS
AUDIO COMPONENT
GITAL
2 2 1
TV
VCR (for example)
VIDEO
VIDEO OUT
(DVD ONLY)
S VIDEO
DVD receiver
Using the VCR for recording DVD
playback
Some DVDs are copy-protected. You cannot record or
dub protected discs using a VCR.
1 Connect the DVD receiver's VIDEO output jack to
the VIDEO IN jack on your VCR. Or, connect the
DVD receiver's S VIDEO output jack to the S-
VIDEO IN jack on your VCR.
2 Connect the DVD receiver's LINE OUT jacks to the
AUDIO IN jacks on your VCR.
This will allow you to make analog stereo (two
channels, right and left) recordings.