Digital home theater component, digital sound projector, digital audio server, digital audio terminal, optional speaker system, plasma display monitor, digital cinema projector, digital home theatre receiver, dvd player, dvd changer, home theatre speaker (44 pages)
Page 2
Active Servo Processing Subwoofer System with a built-in power amplifier. The subwoofer system (NX-SW300 and NX-SW301) employs Advanced Yamaha Active Servo Technology which YAMAHA has developed for reproducing higher quality super- bass sound. This super-bass sound adds a more realistic, theater-in-the-home effect to your stereo system.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. * Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated...
Page 4
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Page 5
YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than as specified.
Placing the center speaker... 12 Placing the front/surround speakers ... 13 Placing the subwoofer ... 13 SYSTEM CONNECTIONS... 14 Connecting the speakers (DVX-S301)... 14 Connecting the speakers (DVX-S302)... 15 Connecting the speakers (DVX-S303)... 16 Connecting the speaker cables ... 17 Connecting the subwoofer...
INTRODUCTION Thank you for purchasing this unit. This Owner’s Manual explains the basic operation of this unit. Notes about discs – This receiver is designed for use with the following discs: Super Audio CD (Super Audio CD), DVD- Video, Video CD, Super Video CD, Audio CD, CD- R, CD-RW, DVD-Audio, DVD+RW, DVD+R, DVD-R, DVD-RW and DVD-RW (VR format).
Page 8
- and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
Page 9
INTRODUCTION DVX-S301 DVD receiver (DVR-S300) Subwoofer (NX-SW301) Center speaker (NX-C301) Front/Surround speakers (x4) (NX-S301) DVX-S302 DVD receiver (DVR-S300) Subwoofer (NX-SW301) Center speaker (NX-C302) Front/Surround speakers (x4) (NX-S302)
DVX-S303 DVD receiver (DVR-S300) Subwoofer (NX-SW300) Center speaker (NX-C302) Front/Surround speakers (x 4) (NX-S302) ■ Supplied accessories FM wire antenna AM loop antenna Remote control POWER PROG TOP MENU/RETURN MENU PRESET SUBTITLE AUDIO TV VOL INPUT Batteries (x 2) Video pin cable System control cable (4 m ) Speaker cables...
FUNCTIONAL OVERVIEW ■ Top and front panels (DVR-S300) 1 STANDBY/ON Turns on the DVD receiver, or sets it to the standby mode (see “Auto eco power standby mode” on page 28). Opens/closes the disc tray. 3 b / a , w / f DVD/CD mode: selects the previous/next track or chapter.
■ Rear panel (DVR-S300) (U.K. and Europe models) 1 AC power cord Connect to a standard AC outlet. 2 AV MONITOR OUT terminal (U.K. and Europe models only) Connect to your TV (see page 19). 3 VIDEO output terminal Connect to the video (composite) jack on your TV (see page 19).
FUNCTIONAL OVERVIEW ■ Rear panel (NX-SW300) 1 SYSTEM CONNECTOR terminal Connect to the DVD receiver. 2 SPEAKER terminals Connect to the speakers. 3 AC power cord Connect to a standard AC outlet. ■ Rear panel (NX-SW301) 1 SYSTEM CONNECTOR terminal Connect to the DVD receiver.
■ Remote control (For DVR-S300) SLEEP POWER POWER DIMMER SCAN PAGE PROG REPEAT A - B SHUFFLE TOP MENU/RETURN ON SCREEN ENTER MENU SET UP PRESET NIGHT SUBTITLE AUDIO ANGLE ZOOM TV VOL TV CH BASS EFFECT SURR MUTE INPUT TUNER DVD/CD Note...
Page 15
FUNCTIONAL OVERVIEW C AUDIO Selects an audio language (DVD) or an audio channel (VCD). D TV VOL (+ / –) Adjusts the TV volume. E TV CH (+ / –) Switches the TV channel. F TV INPUT Switches the TV input. G EFFECT Selects a sound effect.
■ Roles and layout of the speakers To enjoy quality sounds you need to place the speakers in their appropriate positions and install them correctly. The following show the recommended layout of the speakers. DVX-S301 DVD receiver Center speaker Front speaker (L) –...
– After attaching each speaker, check that the speaker is fixed securely. YAMAHA will bear no reponsibility for any accidents caused by improper installations. Screws (3.5 to 4 mm dia.,...
– After attaching each speaker, check that the speaker is fixed securely. YAMAHA will bear no reponsibility for any accidents caused by improper installations. Hanging on a wall (NX-S301) You can hang the speakers on a wall using a commercially available bracket and screws (Diameter: 6 mm).
SYSTEM CONNECTIONS ■ Connecting the speakers (DVX-S301) Notes – Do not connect the power cord of the subwoofer and DVD receiver into an AC outlet until all cable connections are completed. – Please refer to the pages below for detailed information on how connect each speaker.
■ Connecting the speakers (DVX-S302) Notes – Do not connect the power cord of the subwoofer and DVD receiver into an AC outlet until all cable connections are completed. – Please refer to the pages below for detailed information on how connect each speaker. Front speaker (R) NX-S302 (page 17)
SYSTEM CONNECTIONS ■ Connecting the speakers (DVX-S303) Notes – Do not connect the power cord of the subwoofer and DVD receiver into an AC outlet until all cable connections are completed. – Please refer to the pages below for detailed information on how to connect each speaker. Front speaker Front speaker NX-S302...
■ Connecting the speaker cables Connect the speaker cable with the color band to the plus (Red (+)) connector on the front/center/surround speakers and with the white line to the minus (Black (–)) connector. Lever (Black) Press the lever down, then insert the cable into the hole and release the lever.
SYSTEM CONNECTIONS ■ Connecting the DVD receiver and the subwoofer Connect the subwoofer to the DVD receiver using the system control cable. Attach one end to the subwoofer and the other to the SYSTEM CONNECTOR terminal at the rear of the DVD receiver. TO NX-SW300 SYSTEM CONNECTOR...
■ Connecting a TV Notes – You only need to make one video connection from the following options (A,B,C, or D), depending on the capabilities of your TV. – Do not connect the power cords until all cable connections are completed. <A>...
OTHER CONNECTIONS TV IN terminal <E> To listen to TV channels through this DVD receiver, use the audio cables (white/red, not supplied) to connect the TV IN jacks to the corresponding audio out jacks on your Notes – When using AV MONITOR OUT terminal to listen to the TV channels, set the DVD receiver’s component setting to “RGB”...
■ Connecting external AV components If you connect external AV equipment such as a VCR, cassette deck or digital audio component to the following AV jacks on the DVD receiver, you can enjoy those AV sources with the DVD receiver. Also, you can record AV sources played on the DVD receiver using the recording equipment.
OTHER CONNECTIONS ■ Connecting digital audio components Digital audio component Listening to playback Connect the DVD receiver’s DIGITAL IN jack to the DIGITAL OUT jack on a digital audio component. Before starting operation, press AUX repeatedly to select “ ” in order to activate the input source. AUX DIGITAL Notes –...
■ Inserting batteries into the remote control 1 Open the battery compartment. 2 Insert two batteries type R06 or AA, following the indications (+/–) inside the compartment. 3 Close the battery compartment. To replace the batteries If the batteries grow old, the effective operation distance of the remote control decreases considerably.
GETTING STARTED ■ Setting a TV Note Make sure you have completed all the necessary connections (see “Connecting a TV” on page 19). 1 Press DVD/CD. → “ ” appears in the display panel. DVD/CD 2 Turn on the TV and set to the correct video-in channel. →...
Page 30
Setting the TV display Set the aspect ratio of the DVD receiver according to the TV you have connected. The format you select must be available on the disc. If it is not, the TV display setting will not affect the picture during playback. 1 In DVD/CD mode, press SET UP.
GETTING STARTED ■ Setting language preferences You can select your preferred language settings so that this receiver will automatically switch to your preferred language whenever you load a disc. If the language selected is not available on the disc, the disc’s default setting language will be used instead.
■ Setting speaker channels You can adjust the delay times (for center and surround speakers only) and volume level for individual speakers. These adjustments let you optimize the sound of your system to best suit your surroundings and setup. Note Press on the remote control to select the multi- SURR...
DISC OPERATION IMPORTANT! If the inhibit icon ( or “X”) appears on the TV – screen when a button is pressed, the function for that button is not available on the current disc or at the current time. DVD discs and players are designed with regional –...
■ Selecting various repeat shuffle functions Repeat play mode Repeat chapter/title/disc (DVD-V) Each time you press REPEAT, the display changes as follows: CHAPTER REPEAT OFF DISC CHAPTER*: repeats the current chapter. TITLE: repeats the current title. DISC*: repeats the entire disc. REPEAT OFF: exits repeat mode.
DISC OPERATION ■ Other operations for video playback (DVD/VCD/SVCD) POWER DIMMER SLEEP POWER SCAN PAGE PROG REPEAT A - B SHUFFLE TOP MENU/RETURN ON SCREEN TOP MENU/ RETURN ENTER MENU SET UP MENU PRESET SUBTITLE NIGHT SUBTITLE AUDIO ANGLE ZOOM AUDIO TV VOL TV CH...
Page 36
Advancing by frame 1 During playback, press e on the remote control. → Play will pause and sound will be mute. 2 Press e again to select the next picture frame. 3 To resume normal playback, press h. Changing sound track language This operation works only on DVDs with multiple soundtrack language, you can change the language you want while playing a DVD.
Page 37
DISC OPERATION Preview function Preview function includes the following 2 types. Digest: This function displays a thumbnail to help you to preview the following sections of the disc. TITLE, CHAPTER, GROUP, TRACK Interval: This function divides the following options at regular intervals to help you preview the scene you want to see.
■ Playing MP3/JPEG/DivX This receiver can play DivX ® , MP3, JPEG, VCD and SVCD files on a personally recorded CD-R/RW disc or commercial CD. Note You have to turn on your TV and set to the correct Video In channel (see “Setting a TV”...
DISC OPERATION Playing MP3 music and a JPEG picture simultaneously 1 Load an MP3 disc containing both music and picture data. → The disc menu appears on the TV screen. 2 Select an MP3 track and press h to start playback. 3 During MP3 music playback, select a picture folder from the TV screen and press h.
■ Special features for picture disc playback 1 Load a picture disc (Kodak Picture CD/JPEG). → For Kodak discs, the slide show begins. → For JPEG discs, the picture menu appears on the TV screen. 2 Press h to start the slideshow. Note You have to turn on your TV and set to the correct Video In channel (see “Setting a TV”...
DVD SETUP MENU OPTIONS DVD SETUP MENU OPTIONS This setup is carried out via the TV, enabling you to customize the DVD receiver to suit your particular requirements. ■ General setup menu 1 In DVD/CD mode, press SET UP. 2 Press to select the [GENERAL SETUP PAGE].
Page 42
To exit the menu, press SET UP. ® DivX VOD registration code Yamaha provides you with the DivX Demand) registration code that allows you to rent and purchase videos using the DivX information, go to www.divx.com/vod. 1 In [GENERAL SETUP PAGE], press highlight [DIVX(R) VOD CODE], then press →...
DVD SETUP MENU OPTIONS ■ Audio setup menu 1 In DVD/CD mode, press SET UP. 2 Press to select [AUDIO SETUP PAGE]. 3 Press ENTER (OK) to confirm. AUDIO SETUP PAGE SPEAKER SETUP CD UPSAMPLING NIGHT MODE LIP SYNC Speaker setup This menu contains setup options for audio output so that you can set your speakers to reproduce high quality surround sound.
■ Video setup menu 1 In DVD/CD mode, press SET UP. 2 Press to select [VIDEO SETUP PAGE] icon. 3 Press ENTER (OK) to confirm. VIDEO SETUP PAGE TV TYPE TV DISPLAY PROGRESSIVE PICTURE SETTING COMPONENT BLACK LEVEL CLOSED CAPTION TV type This menu contains the options for selecting the color system that matches the connected TV.
Page 45
DVD SETUP MENU OPTIONS BRIGHTNESS CONTRAST TINT COLOR 4 Press to highlight one of the following options. BRIGHTNESS Increase the value to brighten the picture or vice versa. Zero (0) is the average setting value. CONTRAST Increase the value to sharpen the picture or vice versa. Zero (0) is the average contrast.
■ Preference setup menu 1 Press s twice to stop playback (if necessary), then press SET UP. 2 Press to select the ‘Preference Setup’ icon. 3 Press ENTER (OK) to confirm. PREFERENCE PAGE AUDIO SUBTITLE DISC MENU PARENTAL MP3/JPEG NAV VR LIST PASSWORD Audio, subtitle and disc menus...
Page 47
DVD SETUP MENU OPTIONS Rating explanation 1 KID SAFE General audience; recommended as acceptable for – viewers of all ages. 3 PG Parental guidance suggested. – 4 PG13 Material is unsuitable for children under age 13. – 5 PGR Parental guidance - restricted; recommended that –...
Page 48
TITLE DIGEST This function will display thumbnails of titles on the screen. A maximum of six thumbnails are displayed per page. → In ORIGINAL LIST mode, the originally recorded titles on the disc are displayed. → In PLAY LIST mode, every title in the play list is displayed.
TUNER OPERATIONS Note Make sure the FM and AM antennas are connected to this receiver. ■ Tuning radio stations 1 Press TUNER to select “ TUNER/FM ”. 2 Press briefly on the remote control. → “ ” appears. SEARCH → The next radio station is tuned automatically.
Page 50
3 Press and hold PROG until “ AUTO PRESET → If a radio station is stored in one of the earlier presets, the same radio station will not store under another preset number. → If no preset number is selected, automatic preset will begin from preset (1) and all former presets will be overridden.
SOUND CONTROLS Note For proper surround sound, make sure the speakers and subwoofer are connected to this receiver (see “Connecting the subwoofer” on page 17). PRESET NIGHT SUBTITLE AUDIO ANGLE ZOOM TV VOL TV CH BASS EFFECT EFFECT SURR MUTE INPUT SURR TUNER...
■ Adjusting the volume level Use the VOLUME control (or press VOL (+/–) on the remote control) to increase or decrease the volume level. → “ ” is the minimum volume level and VOL MIN “ ” is the maximum volume level. VOL MAX To mute the volume temporarily Press MUTE on the remote control.
OTHER FUNCTIONS ■ Setting remote control codes Once you set the appropriate remote control codes, you can use this remote to control your other components. The remote control automatically switches to the appropriate control mode for that component. POWER DIMMER SLEEP POWER SCAN...
Cable and satellite tuner operations Press AUX for the cable and satellite tuner operations. SLEEP POWER POWER DIMMER POWER (TV) SCAN PAGE PROG REPEAT A - B SHUFFLE TOP MENU/RETURN ON SCREEN ENTER (OK) ENTER MENU SET UP PRESET NIGHT SUBTITLE AUDIO ANGLE ZOOM...
If there is any problem with your CinemaStation system, check the following items. If you cannot solve your problem with the following remedies or if your problem is not listed below, turn off and unplug the CinemaStation, then consult the nearest authorized YAMAHA dealer or service center. Problem...
Page 56
Problem Sound played on the DVD receiver cannot be recorded with an external recorder Sounds played on the AV equipment connected to the DVD receiver cannot be recorded with external recording equipment The volume does not increase or sounds are distorted There is no sound from the center, surround speakers and subwoofer...
GLOSSARY Analog Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio The ratio of vertical and horizontal sizes of a displayed image.
Page 58
GLOSSARY Parental control Limits Disc play according to the age of the users or the limitation level in each country. The limitation varies from disc to disc; when it is activated, playback will be prohibited if the software’s level is higher than the user- set level.
SPECIFICATIONS DVD RECEIVER DVX-S300 TUNER SECTION FM Tuning Range 87.50 to 108.00 MHz AM Tuning Range - Canada model 530 to 1700 kHz - Europe, U.K., Australia and Korea models 531 to1602 kHz - Taiwan and Asia models 531 to 1602 kHz/530 to 1700 kHz DISC SECTION Laser Type Semiconductor...
Page 60
SUBWOOFER NX-SW300 Power Supply Rating - Taiwan model 110–120 V, 50/60 Hz - Asia model 220–240 V, 50/60 Hz - Korea model 220 V, 60 Hz Power Consumption 360 W System Bass Reflex System Ω Impedance Speaker Driver 16 cm woofer Frequency Response 40 Hz –...
Page 62
LIST OF REMOTE CONTROL CODES LISTE DES CODES DE COMMANDE Yamaha 1009, 1011, 1036, 1068 Admiral 1033, 1080 Aiko 1032 Akai 1011 Alba 1005, 1013, 1014, 1064, 1076 1009, 1011 Audiovox 1032, 1053, 1079, 1083 Belcor 1009 Bell & Howell 1007, 1039...