Aa" Connecting Rod Cap Removal; Ab" Piston Pin Removal - Mitsubishi 4G6 series Workshop Manual

11A-11-2
4G6 ENGINE (E - W) -
E
Mitsubishi Motors Corporation
REMOVAL SERVICE POINTS

AA" CONNECTING ROD CAP REMOVAL

(1) Mark the cylinder number on the side of the connecting
(2) Keep the removed connecting rods, caps, and bearings

AB" PISTON PIN REMOVAL

(1) Insert the special tool, Push Rod, into the piston from
(2) Place the piston and connecting rod assembly on the
(3) Using a press, remove the piston pin.
Dec. 1996
Piston and Connecting Rod
rod big end for correct reassembly.
in order according to the cylinder number.
the side on which the front mark is stamped in the piston
head, and attach the guide C to the push rod end.
special tool, Piston Pin Setting Base, with the front mark
facing upward.
NOTE
Keep the disassembled pistons, piston pins and
connecting rods in order according to the cylinder number.
PWEE9616