Processor - HP Compaq Pro 6305 Maintenance And Service Manual

Processor

Description
AMD A10-5800B, 3.8 GHz, 4-MB L2 cache (100-W), HD 7660D
AMD A8-5500B, 3.2 GHz, 4-MB L2 cache (65-W), HD 7560D
AMD A6-5400B, 3.6 GHz, 4-MB L2 cache (65-W), HD 7540D
AMD A4-5300B, 3.4 GHz, 4-MB L2 cache (65-W), HD 7480D
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the heat sink
4. Rotate the locking lever to its full open position (1).
5. Carefully lift the processor from the socket (2).
CAUTION:
handling them could cause irreparable damage. Once pins are damaged it may be necessary to
replace the system board.
The heat sink must be installed within 24 hours of installing the processor to prevent damage to
the processor's solder connections.
Reverse the removal procedure to install a new processor.
NOTE: After installing a new processor onto the system board, update the system ROM to ensure
that the latest version of the BIOS is being used on the computer. The latest system BIOS can be
found on the Web at: http://h18000.www1.hp.com/support/files.
84 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
(Computer Access Panel on page
(Heat sink on page
Do NOT handle the pins in the processor socket. These pins are very fragile and
(Preparation for Disassembly on page
50).
82).
Spare part number
703598-001
703601-001
703600-001
703599-001
49).