Setting Your Changes As A New Default; Restoring Fax Options To The Factory Default; Additional Sending Operations; Sending A Fax Manually - Brother MFC-J470DW Advanced User's Manual

Chapter 3
Setting your changes as a
new default
You can save the settings for the fax options
you use most often by setting them as the
default settings, such as Fax Resolution,
Contrast, Glass ScanSize and
Real Time TX. These settings will remain
until you change them again.
a
Press (FAX).
b
Press a or b to choose the menu option
that you want to change and press OK.
Then press a or b to choose the new
option.
Press OK.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
d
Press 1 to choose Yes.
e
Press Stop/Exit.
Restoring fax options to the
factory default
You can restore all the fax options you have
changed back to the factory default. These
settings will remain until you change them
again.
a
Press (FAX).
b
Press a or b to choose
Factory Reset.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
8
Additional sending
operations
3

Sending a fax manually

Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
NOTE
To send a multi-page fax, use the ADF.
a
Load your document.
b
Press
c
To listen for a dial tone, pick up the
handset of the external telephone.
d
Dial the fax number using the external
telephone.
e
When you hear the fax tones, press
Mono Start or Colour Start.
If you are using the scanner glass, press
1 to send the fax.
f
Replace the handset of the external
phone.
3
Sending a fax at the end of a
conversation
At the end of a conversation, you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Load your document.
c
Press
(FAX).
(FAX).
3
3
3