Cleaning The Paper Pick-Up Rollers - Brother MFC-J470DW Advanced User's Manual

c
(MFC models)
Lift the Jam Clear Flap (2), and then
clean the back side of the Paper Feed
Rollers (1) with a soft lint-free cloth
slightly moistened with water.
After cleaning, wipe the rollers with a
dry, soft lint-free cloth to remove all
moisture.
1
d
Put the paper tray firmly back in the
machine.
e
Re-connect the power cord.
NOTE
Do not use the machine again until the
rollers are completely dry. Using the
machine before the rollers are dry may
cause paper feed problems.
Cleaning the paper pick-up
rollers
a
Unplug the machine from the electrical
socket.
b
Pull the paper tray completely out of the
machine.
NOTE
If the machine has been feeding multiple
pages when there are only a few sheets of
paper left in the tray, clean the Base
Pad (1) with a soft lint-free cloth slightly
moistened with water.
2
After cleaning, wipe the pad with a dry,
soft lint-free cloth to remove all moisture.
1
c
Open the Jam Clear Cover (1) at the
back of the machine.
1
Routine maintenance
35
A
A