Making Copies; Copy Options; Stop Copying; Changing Copy Speed And Quality - Brother MFC-J470DW Advanced User's Manual

7

Making copies

Copy options

You can change the copy settings temporarily
for the next copy.
The machine returns to its default settings
after being idle for 1 minute.
1
Press COPY and then press a or b to scroll
through the copy settings. When the setting
you want is highlighted, press OK.
When you have finished choosing settings,
press Mono Start or Colour Start.
1
MFC models only
NOTE
You can save some of the settings you
use most often by setting them as the
default settings. These settings will
remain until you change them again. (See
Setting your changes as a new default
on page 31.)

Stop copying

To stop copying, press Stop/Exit.
24
Changing copy speed and
7
quality
You can choose different settings to change
the speed and quality of your copies. The
factory default is Normal.
NOTE
If you choose Fast
only choose Plain Paper in
Paper Type.
1
MFC models only
 Fast (MFC models)
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.

Normal
Normal is the recommended mode for
ordinary print outs. This produces good
copy quality with good copy speed.
7

Best
Use Best mode to copy precise images,
such as photographs. This provides the
highest resolution and slowest speed.
a
Load your document.
b
(MFC models)
Press
c
Enter the number of copies you want.
d
Press a or b to choose Quality.
Press OK.
e
Press a or b to choose Fast
or Best.
Press OK.
1
MFC models only
1
or Normal, you can
(COPY).
1
, Normal
7
7