Table of Contents
Advertisement
B
Set the first page of your original face down on the exposure glass and align
it to the rear left corner.
1
2
1: Reference mark
2: Scale
C
Lower the document feeder.
Setting Originals in the Document Feeder
Note
The last page should be on the bottom.
Do not stack originals beyond the limit mark on the side fence of the docu-
ment feeder.
When copying thin originals (40 – 52 g/m
a time in the document feeder or on the exposure glass to avoid damage due
to multi-sheet feeds (several pages fed together at the same time).
Originals in pencil or other similar media may get slightly smudged after be-
ing scanned through the ADF. To avoid this, you can set them on the expo-
sure glass instead.
As a rule, one-sided originals are delivered to the ADF external tray, and two-
sided originals to the ADF tray.
Reference
For originals that the document feeder can handle, see
To set a stack of originals in the document feeder
A
Adjust the guide to the original size.
ND1C01EE
2
, 11 – 14 lb, Bond), set one page at
Setting Originals
P.15 "Originals".
2
27
Advertisement
Table of Contents
