Related Manuals for Savin 10502
Summary of Contents for Savin 10502
-
Page 1: System Settings
2585/8502,25105/10502 Operating Instructions SYSTEM SETTINGS Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. - Page 2 Note to users in the United States of America Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursu- ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 3 Two kinds of size notation are employed in this manual. With this machine refer to the inch version. For good copy quality, Savin recommends that you use genuine toner. Savin shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts in your office product.
- Page 4 Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. SAVIN CORPORATION, 333 Ludlow Street, Stamford, CT 06904 203-967-5000 Note to users in Canada Note: This Class B digital apparatus complies with Canadian ICES-003.
-
Page 5: Energy Star Program
ENERGY STAR Program The ENERGY STAR Guidelines intend to establish an international energy-saving sys- tem for developing and introducing energy-efficient office equipment to deal with en- vironmental issues, such as global warming. When a product meets the ENERGY STAR Guidelines for energy efficiency, the Part- ner shall place the ENERGY STAR logo onto the machine model. -
Page 6: Recycled Paper
Specification Low Power mode Auto Off mode Duplex Priority -Recycled Paper Please contact your sales or service representative for recommended recycled paper types that may be used in this machine. Type 1 Power consump- 312W tion Default interval 15 minutes Recovery time Less than 40 sec- onds... -
Page 7: How To Read This Manual
How To Read This Manual Symbols In this manual, the following symbols are used: R WARNING: This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the in- structions under this symbol. -
Page 8: Table Of Contents
TABLE OF CONTENTS Manuals for this Machine... 1 Machine Types... 2 1. User Tools (System Settings) Keys for User Tools (System Settings) ... 3 Accessing User Tools (System Settings)... 5 Exiting from User Tools ... 6 User Tools Menu (System Settings) ... 8 Settings You can Change with the User Tools ... -
Page 9: Manuals For This Machine
Manuals for this Machine The following two manuals have been prepared for operating this machine: this manual describing how to make system settings for copying functions and the “Copy Reference” manual introducing the operating procedures for copying functions. System Settings (this manual) Describes how to access the system User Tools to make the machine easier to use. -
Page 10: Machine Types
Machine Types This machine comes in two models which vary in copy speed. To make sure which model you have, see the inside front cover. Copy Speed Printer Unit Type 1 85 copies/minute (A4K, " 11"K) Option Type 2 105 copies/minute (A4K, "... -
Page 11: User Tools (System Settings)
1. User Tools (System Settings) Keys for User Tools (System Settings) Status indicator • The condition of the machine is distin- guished by this indicator. By default, this indicator is turned off. You can specify whether to light the Status In- dicator. - Page 12 User Tools (System Settings) {#} key (Enter key) Press to enter a value or confirm a setting. Number keys Use to enter the number of copies you wish to make. Also use to enter values for various features. {Counter} key Press to check the total number of copies made.
-
Page 13: Accessing User Tools (System Settings)
Accessing User Tools (System Settings) This section is for the key operators in charge of this machine. With User Tools, you can change the machine's default settings. Preparation After using User Tools, be sure to exit them to return to Copy mode. The key selected is highlighted. -
Page 14: Exiting From User Tools
User Tools (System Settings) Select the desired menu and touch the key. Change the settings by following the instructions on the panel display. Then press the [OK] key. Note [OK]: Press to store the new settings and return to the previous menu. [Cancel]: Press to return to the previous menu without changing any data. - Page 15 Accessing User Tools (System Settings)
-
Page 16: User Tools Menu (System Settings)
User Tools (System Settings) User Tools Menu (System Settings) - Page 17 User Tools Menu (System Settings)
-
Page 18: Settings You Can Change With The User Tools
User Tools (System Settings) Settings You can Change with the User Tools Reference Regarding how to access the user tools, see tem Settings)”. General Features Menu Function Priority Panel Tone Ready Panel Tone Copy Count Display P.5 “Accessing User Tools (Sys- Description You can specify the mode that is displayed when the opera- tion switch is turned on or System Reset is activated. - Page 19 Menu Description System Reset If no operation is performed for a selected time, the machine will automatically return to initially selected display. This function is called “System Reset”. You can set the time between 10 and 999 seconds. Note Default: 60 seconds Energy Saver Timer The machine enters the Energy Saver mode automatically a certain time after your job is finished.
- Page 20 User Tools (System Settings) Menu Auto Tray Switching Description If you load paper of the same size in two or more trays, re- gardless of the paper direction, the machine automatically shifts to the other tray when the tray in use runs out of paper when using Auto Paper Select.
- Page 21 Menu Description Auto Tray Switching • If you select [Off]. When paper has run out, “Please load paper” will be dis- played, and copying will be interrupted. Note Default: On (Rotate) If you put recycled paper, special paper or translucent paper in paper trays and indicate them in the Tray Paper Settings menu, the Auto Tray Switching function is avail- able to these trays only when their paper types are iden-...
- Page 22 User Tools (System Settings) Menu Paper Tray Priority Original: F/F4 Size Set- ting Description You can select the paper tray which will be selected as a de- fault in the following conditions: • When the operation switch is turned on. •...
-
Page 23: Timer Settings
Timer Settings When entering Timer Setting mode, if a key operator code has already been set, you must enter the code (up to 8 digits). Reference See “Key Operator Access” Menu Description Date Set the date for the machine's internal clock. Time Set the time for the machine's internal clock. - Page 24 User Tools (System Settings) Menu Key Operator Code For Off Setting -About weekly timers The weekly timers allow you to restrict the use of the machine to certain times of the day and week. The machine will switch itself on and off everyday at the times you specified.
-
Page 25: Tray Paper Settings
Tray Paper Settings Menu Description Tray1: Paper Type You can specify the types and size of the copy paper set in the paper tray and make them indicated. Tray2: Paper Type You can set with the following steps. Tray3: Paper Type Tray4: Paper Type Tray5: Paper Type Tray6: Paper Type... - Page 26 User Tools (System Settings) Menu Tray1: Paper Type Tray2: Paper Type Tray3: Paper Type Tray4: Paper Type Tray5: Paper Type Tray6: Paper Type Slip Sheet 1 Slip Sheet 2 Slip Sheet 3 Cover Sheet Separation Sheet Description 3. Slip Sheet Copy In Duplex Mode •...
-
Page 27: Key Operator Tools
Key Operator Tools When entering Key Operator Tools, if a key operator code has already been set, you must enter the code (up to 8 digits). Menu Description User Codes: Copier/ You can specify whether to control User Codes. This setting Document Server is also valid for the copy server. - Page 28 User Tools (System Settings) Menu Key Operator Access User Code Display Description You can specify whether to control the machine by the Key Operator Access code (the password to operate the settings of User Tools). If you wish to control it, you need to register the Key Operator Access code.
- Page 29 Menu Description AOF (Keep It On.) Note For details, contact your service representative. Memory Allocation You can select the hard disk memory allocation priority from two options. Copier Priority Document Server Priority Note Default: Copier Priority Display/Print Counter You can have various counters displayed or printed. Settings You can Change with the User Tools...
-
Page 30: Index
INDEX AOF (Keep It On.) , 21 Auto Off Timer , 11 Auto Tray Switching , 12 Copier/Document Server Output Tray , 13 Copy Count Display , 10 Cover Sheet , 18 Date , 15 Display/Print Counter , 21 Energy Saver Timer , 11 Function Priority , 10 Key Counter Copier Access , 19...