Page 1
Savin 2555 Operating Instructions COPY REFERENCE Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual.
6. User Tools (Copy/ Document Server Features) Accessing the User Tools (Copy/ Document Server Features) This section is for the key operators in charge of this machine. You can change or set the machine's default settings. Preparation After using the User Tools, be sure to exit from the User Tools. The selected key is highlighted.
User Tools (Copy/Document Server Features) Select the desired menu and press the key. Note [TNext]: Press to go to the next page. [UPrev.]: Press to go back to the previous page. Reference P.308 “User Tools Menu (Copy/Document Server Features)”. Change the settings by following the instructions on the display panel. Then press the [OK] key.
Page 4
Accessing the User Tools (Copy/Document Server Features) This page is intentionally blank.
User Tools (Copy/Document Server Features) User Tools Menu (Copy/Document Server Features) General Features Prev. Key Next Key Page Format Prev. Key Next Key Prev. Key Next Key Page Numbering Reproduction Ratio Prev. Key Prev. Key Next Key Date Dtamp...
Page 6
User Tools Menu (Copy/Document Server Features) Count Manager Input / Output Stamp Setting Background Numbering Preset Stamp Prev. Key Next Key Next Key User Stamp Prev. Key Next Key ZBQS130E...
User Tools (Copy/Document Server Features) Settings You Can Change with the User Tools Reference For how to access the User Tools, see P.305 “Accessing the User Tools (Copy/ Document Server Features)”. General Features Menu Description Auto Paper Select As a default setting, Auto Paper Select is selected. You can can- Priority cel this setting.
Page 8
Settings You Can Change with the User Tools Menu Description Original Mode Dis- You can choose whether the original modes are shown on the play initial display. Note Default: No If you choose “Yes”, the display is shown as below. Original Mode Quality Level You can adjust the quality level of copies for each of the original types (Text, Text·Pho- to, Photo, Pale, Generation).
Page 9
User Tools (Copy/Document Server Features) Menu Description Photo For a photo original, adjust the finish quality level to match the type of photo original. Note Default: Screened Printed [SP Mode Changed] is the value set during service setup. Select [Screened Printed] for printed photo originals, and [Con- tinuous Tone] for printed photo originals with fine dots.
Page 10
Settings You Can Change with the User Tools General Features Menu Description Duplex Mode Prior- You can select the type of the Duplex function effective when the machine is turned on, Energy Saver mode is off, or Auto Re- set is on. Note Default: •...
Page 11
User Tools (Copy/Document Server Features) Menu Description Job End Call You can choose whether or not the beeper sounds when copy- ing is complete, when copying is interrupted, when the paper tray runs out of paper, or when there is a paper jam. Note Default: On When the “Auto Response (Human) Sensor”...
Settings You Can Change with the User Tools Reproduction Ratio Menu Description Shortcut R/E You can register up to three frequently used Reduce/Enlarge ratios other than the fixed Reduce/Enlarge ratio and have them shown on the initial display. You can also change the registered Reduce/Enlarge ratios.
Page 13
User Tools (Copy/Document Server Features) Menu Description Priority Setting : En- You can set the ratio with priority when the [Reduce/Enlarge] key large is pressed, followed by the [Enlarge] key. Note Default: • Metric version: 141% • Inch version: 155% Reproduction Ratio Menu Description...
Settings You Can Change with the User Tools Menu Description Shrink&Center Ra- You can set a Reduce/Enlarge ratio when registering “Shrink&Center” in a Shortcut Key. Note Default: 93% Page Format Menu Description Front Margin: Left/ You can specify left and right margins on the front side of copies Right in Margin Adjust mode.
Page 15
User Tools (Copy/Document Server Features) Menu Description 2 Duplex Auto In 1 sided 2 sided Duplex mode, you can specify whether to Margin Adjust automatically set the margins on the back side. The margin is set to the same value of “Back Margin: Left/ Right”.
Page 16
Settings You Can Change with the User Tools Menu Description Repeat Separation You can select a separation line in Image Repeat mode from no Line line, Solid line, Broken line 1, Broken line 2, or Crop. • None • Solid •...
Page 17
User Tools (Copy/Document Server Features) Page Format Menu Description Double Copies Sep- You can select a separation line in Double Copy mode from no aration Line line, Solid line, Broken line, or Crop. • None • Solid • Broken • Crop Marks Note Default: None...
Page 18
Settings You Can Change with the User Tools Menu Description Combine Separa- You can select a separation line in Combine mode from no line, tion Line Solid line, Broken line 1, Broken line 2, or Crop. • None • Solid •...
Page 19
User Tools (Copy/Document Server Features) Menu Description Booklet/Magazine You can select the type of originals for Booklet or Magazine Original Orienta- mode. tion Note Default: Portrait Copy Order In You can set the copy order in Combine mode to “Left to Right” Combine Mode or “Top to Bottom”.
Settings You Can Change with the User Tools Stamp Setting Background Numbering Menu Description Size You can set the size of the numbers. Note Default: Normal • Small: About 8 4mm, 0.32" 0.16" • Normal: About 32 16mm, 1.28" 0.64" •...
Page 21
User Tools (Copy/Document Server Features) Menu Description Stamp position You can set the position at which the stamp is printed. Press the arrow keys to adjust the position. Note Default: • Metric Version: • Position: Top Right • Top/Bottom Margin: 24mm •...
Page 22
Settings You Can Change with the User Tools User Stamp Menu Description Program/Delete Stamp You can register up to 4 custom stamps with your favorite design. You can register/ change/delete your favorite design as a user stamp. How to Program/Delete Stamp, see P.189 “Program/Delete User Stamp”.
Page 23
User Tools (Copy/Document Server Features) Menu Description Font You can select the Date Stamp font. Note Default: Font 1 This setting is linked with Page Numbering. Position Priority You can set the position at which the stamp is printed. Press the arrow keys to adjust the position. Note Default: •...
Page 24
Settings You Can Change with the User Tools Menu Description Font You can select the font of the page number that is printed in Page Numbering mode. Note Default: Font 1 This setting is linked with Date Stamp. Size You can set the size of the stamp that is printed in Page Numbering mode.
Page 25
User Tools (Copy/Document Server Features) Menu Description Superimpose You can select whether page numbers are printed negative when they overlap black parts of the image. Note Default: Off This setting is linked with Date Stamp.
Page 26
Settings You Can Change with the User Tools Input/Output Menu Description Batch (SADF) Auto Re- When you set one original at a time in the document feeder, set Time the Auto Feed indicator lights for a selected time after an original is fed to show that the document feeder is ready for another original.
Page 27
User Tools (Copy/Document Server Features) Menu Description Auto Sort Mode You can specify whether Sort mode is selected when the machine is turned on or the mode is cleared. Note Default: No Memory Full Auto Scan When the memory becomes full while scanning originals, Restart the machine can make copies of the scanned originals first, then automatically proceed scanning the remaining origi-...
Settings You Can Change with the User Tools Count Manager When a key operator code has already been entered, you cannot begin manager settings unless you enter the key operator code (up to 8 digits). Menu Description Check/Reset/Print Copy Counter You can check or print the number of copies made under each user code.
Page 29
User Tools (Copy/Document Server Features) Menu Description Face-Up/Down Selec- You can set whether copies are delivered face up or face tion in Bypass Mode down when making copies from the bypass tray. Limitation Only use “Face Down Exit” when copying onto stan- dard high quality paper with a weight of 52 –...
7. REMARKS Do's And Don'ts R CAUTION: • Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment. •...
REMARKS Where to Put Your Machine Machine Environment Your machine's location should be carefully chosen because environmental con- ditions greatly affect its performance. Optimum environmental conditions R CAUTION: • Keep the equipment away from humidity and dust. Otherwise a fire or an electric shock might occur.
Where to Put Your Machine Power Connection R WARNING: • Only connect the machine to the power source described on the inside front cover of this manual. Connect the power cord directly into a wall outlet and do not use an extention cord. •...
REMARKS Access to the Machine Place the machine near the power source, providing clearance as shown. TSPS060E Rear: more than 3 cm (1.2") Right: more than 4 cm (1.6") Front: more than 70 cm (27.6") Left: more than 10 cm (4.0") Note For the required space when options are installed, contact your service repre- sentative.
Maintaining Your Machine Maintaining Your Machine If the exposure glass or document feeder belt is dirty, you might not be able to make copies as you want. Clean them if you find them dirty. Cleaning the machine Wipe the machine with a soft, damp cloth. Then, wipe it with a dry cloth to remove the water.
8. Specification Mainframe Configuration: Console Photosensitivity type: OPC drum ( 100) Original scanning: One-dimensional solid scanning system through CCD Copy process: Dry electrostatic transfer system Development: Dry two-component magnetic brush development system Fusing: Heating roll pressure system Resolution: 600 dpi Exposure glass: Stationary original exposure type Original reference position:...
Page 37
Specification • Duplex: A3L – A5L, 11" 17"L – 5 " "L (impossible on A5K, " " K) • LCT: A4K, B5K, 8 " 14"K " 11"K The optional 8 " 14" paper size tray is required to set this size of paper. Copy paper weight: •...
Page 38
Mainframe Reduction Zoom: From 25 to 400% in 1% steps. Maximum continuous copy run: 999 sets Copy paper capacity: • Tray 1 (Tandem tray) : 3,100 sheets (1,550 sheets 2) (80g/m , 20 lb. Bond) • Tray 2 (550-sheet tray) : 550 sheets (80g/m , 20 lb.
Page 39
Specification Space for mainframe (W D): • 1,265 750mm, 49.9" 29.6" (ADF external extender is not used. Optional Output tray is installed.) • 1,380 750mm, 54" 30" (ADF external extender is used for larger size originals. Optional Output tray is installed.) Noise Emission Sound Power Level: •...
Page 42
50-Sheet Finisher Power consumption: 48W (power is supplied from the mainframe.) Dimensions (W D H): 545 960mm, 24.7" 21.5 " 37.8" Weight: Approx. 45kg, 99.3 lb Note Specifications are subject to change without notice.
Specification Large Capacity Tray (LCT) (Option) Paper size: A4K, B5K, 8 " 14"K " 11"K The optional 8 " 14" paper size tray is required to set this size of paper. Paper weight: 64 – 105g/m , 16 – 24 lb. Bond Paper capacity: 3,500 sheets (80g/m , 20 lb.