Product Notices; Installer Hazard Notification; Factory-Assembled Features - Kohler K-1200-AC Installation Instructions Manual

Builder portfolio whirlpool baths
Table of Contents

Advertisement

6. PRODUCT NOTICES

A. INSTALLER HAZARD NOTIFICATION
DANGER: Risk of fire, electric shock, or injury
to persons. Read important safety instructions on
inside front cover of these instructions.
WARNING: Risk of electrical shock. A licensed
electrician should make all electrical connections.
WARNING: Risk of electrical shock. Connect
only to a circuit protected by a Ground-Fault
Circuit-Interrupter (GFCI).
WARNING: Risk
Disconnect power before servicing.
WARNING: Risk of injury or property damage.
Please read all instructions thoroughly before
beginning installation, including the following
Product Requirements.
NOTICE: Follow all local plumbing and electrical
codes.
CA
106548-
(9437)
of
electrical
shock.
B. FACTORY-ASSEMBLED FEATURES
K-1201, K-1206, K-1211, K-1216, K-1221: Factory
installed components include pump and air switch
transmitter. No installation is needed.
K-1200, K-1205, K-1210, K-1215, K-1220: Factory
installed components include pump. Wall timer is
shipped attached to whirlpool harness.
The whirlpool pump and piping are factory-assembled.
WARNING: Unauthorized modification may
cause unsafe operation and poor performance
of the whirlpool. Do not relocate the whirlpool
pump or make other modifications to the whirlpool
system, as this could adversely affect the
performance and safe operation of the whirlpool.
Kohler Co. shall not be liable under its warranty or
otherwise for personal injury or damage caused by
any such unauthorized modification.
10
Kohler Co., Kohler WI

Advertisement

Table of Contents
loading

Table of Contents