Checking The Fram Checksum; Checking The Calibration-Related Functions - A&D AD-4408A Instruction Manual

10.2.11. Checking the FRAM checksum

C5 fraP displayed, press the ENTER key to display the FRAM checksum. The
With
memory set in the general functions is not counted.
The example below is when the checksum is EF.
C 5 0 0 e f

10.2.12. Checking the calibration-related functions

With CalfdtP displayed, press the ENTER key to display the settings of the
calibration-related functions.
NOTE: For contents and operations of the calibration-related functions, refer to
"7.3. Calibration-Related Functions".
The settings can not be changed here.
Page 40
AD-4408A