6.1.5.
display
Assign a function to the
Functions related to the
fncf04
: Assigns a function to the
0: None
1: Zero tracking in progress
2: Alarm (Zero range setting error, over)
3: F key status (Read the description below.)
F key status
Enables when alternate switch or momentary switch is selected for
The
display turns ON when the F key is ON and turns OFF when the F key is OFF.
6.1.6. Memory backup
Zero value, tare weight, calibration data and function data are written into the FRAM.
FRAM is a non-volatile memory and does not require batteries.
Data retention time is 10 years.
display in the general functions.
display
display from the functions below:
Page 17
fncf02
(F key).
AD-4408A