Data Transfer Mode - A&D AD-4408A Instruction Manual

9.1.3. Data transfer mode

Three data transfer modes are available; stream, auto printing and manual printing.
Stream mode
Auto printing mode
Manual printing mode
Functions related to the data transfer mode
Cl f04
: Adds an ID number to the standard serial output.
The example below is when an ID number is added.
@
ID number
Calf20
: Enables or disables the print command when the gross weight is negative.
AD-4408A
Transmits data in sync with the display update rate. If
the indicator can not catch up with the update rate
because of the baud rate, the transmission is paused
until the next updating.
The transmitted data is the same as what is being
displayed. Data that is not displayed is never
transmitted.
Transmits data once only when the weight value with
5 d or greater is stable.
For another transmission, the weight value must fall
below 5 d once.
Transmits data when the F key, assigned as the
manual print command, is pressed.
0 9 S T , G S , + 0 1 2 3 . 4 5 k g
Page 36
C R L F