Description Of The Item "Data Output Mode - A&D BM-20 Manual

Description Of The Item "Data Output Mode"

10.4.
The parameter setting of "Data output mode (
memory ( )" parameter is set to "
data
transmitted using the RS-232C interface.
Key mode
When the
PRINT
stores the weighing data and the display blinks one time.
Required setting
Auto print modes A and B
When the displayed value is stable and the conditions of "Auto print polarity", "Auto print
difference" and reference value are met, the balance outputs or stores the weighing data.
When the
PRINT
stores the data and the display blinks one time.
Auto print mode A
Example
Required setting
Auto print mode B
Example
Required setting
Stream mode
The balance outputs the weighing data continuously regardless of the display condition. When the
display refresh rate is set to 5 times / second (5pd 0), the data output rate is also set to the same
5 times / second. The display does not blink in this mode. The interval memory mode is used
when the "Data memory (
Example
Required setting
Caution The balance may not transmit the data completely at the specified refresh rate,
depending on the baud rate or time, date and ID number appended to the weighing data.
Interval mode
The weighing data is periodically stored in memory.
Example
Required setting
BM series
2
key is pressed with the stabilization indictor turned on, the balance outputs or
dout prt 0
key is pressed with the stabilization indictor turned on, the balance outputs or
For weighing each time a sample is placed and removed, with "
to " " (to adjust zero after the data is output).
1
dout prt 1
dout ap-p
dout ap-b
dout ar-d 1
For weighing while a sample is added.
dout prt 2
dout ap-p
dout ap-b
)" parameter is set to "
data
For monitoring data on a computer.
dout prt 3
dout data 0
ba5fnc 5pd
5if bp5
For periodical weighing without a personal computer command and to
output all of the data, to a computer, at one time.
dout prt 3
dout data 1
dout int
)" applies to the performance when the "Data
prt
" (to store the weighing data) and when the data is
Key mode
Auto print mode A (reference = zero)
Auto print polarity
Auto print difference
Zero after output
Auto print mode B (reference = last stable value)
Auto print polarity
Auto print difference
" (to store the weighing data).
1
Stream mode
Data memory function is not used
Display refresh rate
Baud rate
Interval mode
Data memory function is used
Interval time
45
" set
ar-d