Other Display - A&D BM-20 Manual

Display Error code
EC,E02
EC,E03
EC,E04
EC,E06
EC,E07
Other error code

Other Display

17.3.
When this indicator blinks, automatic self calibration is required. The indicator
blinks when the balance detects changes in ambient temperature. If the balance
is not used for several minutes with this indicator blinking, the balance performs
automatic self calibration. The blinking period depends on the operating
environment.
Advise The balance can be used while this indicator is blinking. We recommend that you
perform automatic self calibration for precision weighing.
The display (
password function and turning on the balance.
Enter a correct password. Refer to "15. Password Function".
BM series
Not ready
A received command can not be processed.
Example:
The balance received a "Q" command, but not in the weighing mode.
The balance received a "Q" command while processing a RE-ZERO
command. Adjust the delay time to transmit a command.
Timeout error
If the timeout parameter is set to "
the next character of a command within the time limit of one second.
Confirm the communication.
Excess characters error
The balance received excessive characters in a command.
Confirm the command.
Format error
A command includes incorrect data.
Example:
The data is numerically incorrect. Confirm the command.
Parameter setting error
The received data exceeds the range that the balance can accept.
Confirm the parameter range of the command.
If an error described above can not be released or other errors are
displayed, contact the local A&D dealer.
pa55
) of the password input is displayed when using the
Description
t-Up on
81
", the balance did not receive