Settings; Tone/Pulse" Switch; Flash Timing" Switch; Setting The Date And The Time - Siemens W10 User Manual

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03

Settings

"Tone/pulse" switch

On the rare of the base is a "Tone/Pulse" switch for tone or pulse
mode selection.

"Flash timing" switch

On the rare of the base is a "Flash time" switch with three flash
time selections, 90ms, 270ms and 600ms. (For use in China, set
it to be 600ms)
Note: the flash time is effective only by setting it before
connected to power and phone cord.

Setting the date and the time

Press the Volume/Time key for 3 seconds
Press or to adjust the Month
Press Volume/Time key to set Date
Press or to adjust the Date
Press Volume/Time key to set the Hour
Press or to adjust the Hour
Press Volume/Time key to set the Minute
Press or to adjust the Minute (or press the Exit key to
exit the setting)
Press Volume/Time key for confirmation and exit

Setting area code (handset and base)

Press and hold the Mem/Prog key for 3 seconds
Enter four digits of area code. If wrong digits are entered, press
Flash/Clear key to modify.
Press Mem/Prog key for confirmation
Press Exit key to exit
8