Storing Phone Numbers; Browsing Lists In The Directory; Inserting Pause Time To A Number; Adding Dialing Pause - Siemens W10 User Manual

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
phone numbers in the directory. The incoming phone numbers
can also be stored in the directory.

Storing phone numbers

Be sure the handset or the base is in Standby.
Enter the phone number (maximal 20 digits). Press the
Mem/Prog key and then enter the location the number will be
stored to (01-16).

Browsing lists in the Directory

Be sure the handset or the base is in Standby.
Press the Channel/Select or Search key on the handset or the
base station until "Store" appears on the display.
Press or key to browse the lists.
Note: If too long, press the 0/Next key to display other lists.

Adding dialing pause

When storing a phone number, press Redial/Pause key to
insert a dialing pause to the phone number (for example, if
you need to dial "9" to make external calls, then insert a
dialing pause after "9"). One dialing pause (about 3 seconds)
takes the place of one digit.

Modifying stored phone numbers

You can modify the stored phone numbers referring to the
instructions within the "Directory".

Storing outgoing phone numbers

Be sure the handset or the base is in standby.
Press the Redial
"Outgoing Call" will appear on the display.
Press or key to browse the records.
Press the Mem/Prog key.
Press the two-digit storing location (01-16).
Note: Press the Exit key to exit.
Setting VIP calls
If a number is set to be a VIP one, when receiving such a call,
you will hear the VIP ringer tone.
How to set the VIP call:
Be sure the handset or the base is in standby.
Press the Channel/Select key until "Store" appears on the
display.
key to view outgoing records, and
18