Ip Dialing And Dial Back; Pin Lock; Setting Pin And Lock Code - Siemens W10 User Manual

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
- Press twice the Redial/Pause key.
- Press 1 (for Mandarin)
- Press twice the Redial/Pause key.
- Enter 1373110888889888 (the card number and pin).
- Press #.
- Press the Mem/Prog key to confirm.
Note: Above program is just for reference only, you can set
different program by different cards.

IP dialing and dial back

Dialing a long-distance number with IP function:
When the handset is in standby, enter the
long-distance number and then press the IP key. The
base will automatically dial with the IP number
added before the long-distance number.
When you are browsing the incoming calls with the
handset, select the number you want to call out,
then press IP key. The base will automatically dial
with the IP number inserted before the long-distance
number.
Press the Talk key on the handset and then press the
IP key. You will hear the dial tone. Then you can
enter the long-distance number.
Dialing back the incoming calls:
If the long-distance number is set as "0", when the
incoming number exceeds 8 digits, the base will
display "0" before the incoming call number.

PIN lock

In order to prevent others from making long-distance calls or
other special calls (for example, "16897888"), you can preset
the lock codes. Enter the initial digits of the phone numbers
that you want to prevent from calling (for example, "0" or
"16"). Please note, prior to setting the lock code, you should
set the PIN first (PIN is a number of four digits).

Setting PIN and Lock Code

For example, if you don't want any one to call "16897888",
you can set the initial two digits of that number as the lock
code and set 0588 as the PIN. Follow the following steps:
Successively press #, #.
Enter PIN 0588.
Enter the restricted number 16.
Press the Mem/Prog key to confirm. The handset or the base
will make a confirmation tone.
21