The Upnp Screen - ZyXEL Communications SBG3300-N000 User Manual

Chapter 8 LAN
Table 34 Static DHCP: Add/Edit (continued)
LABEL
Select Device Info
MAC Address
IP Address
Apply
Cancel

8.4 The UPnP Screen

Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
See page 178
Use the following screen to configure the UPnP settings on your Device. Click Network Setting >
LAN > UPnP to display the screen shown next.
Figure 55 Network Setting > LAN > UPnP
184
DESCRIPTION
If you select Manual Input, you can manually type in the MAC address and IP address of
a computer on your LAN. You can also choose the name of a computer from the drop list
and have the MAC Address and IP Address auto-detected.
If you select Manual Input, enter the MAC address of a computer on your LAN.
If you select Manual Input, enter the IP address that you want to assign to the
computer on your LAN with the MAC address that you will also specify.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
for more information on UPnP.
SBG3300-N Series User's Guide