The Access Control Screen - ZyXEL Communications SBG3300-N000 User Manual

Chapter 15 Firewall
Table 74 Service: Add/Edit (continued)
LABEL
Service
Description
Apply
Cancel

15.4 The Access Control Screen

Click Security > Firewall > Access Control to display the following screen. This screen displays a
list of the configured incoming or outgoing filtering rules.
Figure 100 Security > Firewall > Access Control
The following table describes the labels in this screen.
Table 75 Security > Firewall > Access Control
LABEL
Rules Storage
Space usage
Add new ACL
rule
#
Name
Direction
Src IP
Dst IP
Service
Modify
256
DESCRIPTION
Enter a description for your customized port.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
This bar shows the percentage of the Device's space has been used. If the usage is almost
full, you may need to remove an existing filter rule before you create a new one.
Click this to go to add a filter rule for incoming or outgoing IP traffic.
This is the index number of the entry.
This displays the name of the rule.
This displays the direction of the ACL rule.
This displays the source IP addresses to which this rule applies. Please note that a blank
source address is equivalent to Any.
This displays the destination IP addresses to which this rule applies. Please note that a
blank destination address is equivalent to Any.
This displays the transport layer protocol that defines the service and the direction of traffic
to which this rule applies.
Click the Edit icon to edit the rule.
Click the Delete icon to delete an existing rule. Note that subsequent rules move up by one
when you take this action.
Click the Move To icon to change the order of the rule. Enter the number in the # field.
SBG3300-N Series User's Guide