The Wps Screen - ZyXEL Communications SBG3300-N000 User Manual

7.5 The WPS Screen

Use this screen to configure WiFi Protected Setup (WPS) on your Device.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Set up each WPS connection between two devices. Both
devices must support WPS. See
Note: To use the WPS feature, make sure you have wireless enabled in the Network
Setting > Wireless > General screen.
Note: The Device applies the security settings of the SSID1 profile (see
page
WPA-PSK, WPA2-PSK or No Security.
Click Network Setting > Wireless > WPS. The following screen displays. Select Enable and click
Apply to activate the WPS function. Then you can configure the WPS settings in this screen.
Figure 41 Network Setting > Wireless > WPS
The following table describes the labels in this screen.
Table 27 Network Setting > Wireless > WPS
LABEL
WPS
Method 1
SBG3300-N Series User's Guide
Section 7.9.8.3 on page 171
148). If you want to use the WPS feature set the security mode of SSID1 to
DESCRIPTION
Select Enable to activate WPS on the Device.
Use this section to set up a WPS wireless network using Push Button Configuration (PBC).
Chapter 7 Wireless
for more information about WPS.
Section 7.2 on
159