Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the Device to
its factory defaults. The following warning screen appears.
Figure 158 Reset Warning Message
Figure 159 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your Device.
Refer to
Section 1.6 on page 21
37.3 The Reboot Screen
System restart allows you to reboot the Device remotely without turning the power off. You may
need to do this if the Device hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the Device reboot. This does not affect the
Device's configuration.
Figure 160 Maintenance > Reboot
SBG3300-N Series User's Guide
for more information on the RESET button.
Chapter 37 Configuration
349