Dma Channel - Intel MS-6112 User Manual

DMA Channel 0/1/3/5/6/7

These options specify the bus that the specified DMA channel is
used. These options allow you to reserve DMAs for legacy ISA adapter
cards.
These options determine if AMI® BIOS should remove a DMA
from the available DMAs passed to devices that are configurable by the
system BIOS. The available DMA pool is determined by reading the ESCD
NVRAM. If more DMAs must be removed from the pool, the end user can
use these options to reserve the DMA by assigning an ISA/EISA setting to
it.
IRQ3/IRQ4/IRQ5/RQ7/IRQ9/IRQ10/IRQ11/IRQ14/IRQ15
These options specify the bus that the specified IRQ line is used
on. These options allow you to reserve IRQs for legacy ISA adapter cards.
These options determine if AMI® BIOS should remove an IRQ
from the pool of available IRQs passed to devices that are configurable by
the system BIOS. The available IRQ pool is determined by reading the ESCD
NVRAM. If more IRQs must be removed from the pool, the end user can use
these options to reserve the IRQ by assigning an ISA/EISA setting to it.
Onboard I/O is configured by AMI® BIOS. All IRQs used by onboard I/O
are configured as PCI/PnP. If all IRQs are set to ISA/EISA and IRQ14 and 15
are allocated to the onboard PCI IDE, IRQ9 will still be available for PCI and
PnP devices, because at least one IRQ must be available for PCI and PnP
devices. The settings are ISA/EISA or PCI/PnP. The Optimal and Fail-Safe
default settings are IRQ3 through 7 are ISA/EISA. The Optimal and Fail-Safe
default settings PCI/PnP.
Reserved Memory Size/Reserved Memory Address
Some ISA cards have ROM at 0C000h~0D000h segments, but in a
non-standard format. So Plug & Play BIOS can't detect it. The end user
needs to set it up manually. Setting these options under this condition, will
inform the BIOS which location and how many location is occupied.
®
3-23