Table of Contents
Advertisement
Mounting
Orientation
This product may be mounted in a 90° degree angle (horizontal), provided there is
adequate room for ventilation. The tank of the product should not move from this position.
However, the front portion of the fog machine can tilt up and down in the desired direction.
This is secured by using the bracket adjustment knobs.
Rigging
It is important never to obstruct the fan or vents pathway. Mount the product using, a
suitable "C" or "O" type clamp. Adjust the angle of the product by loosening both knobs
and tilting the product. After finding the desired position, retighten both knobs.
·
When selecting installation location, take into consideration fluid tank access and
routine maintenance.
·
Safety cables must always be used.
·
Never mount in places where the product will be exposed to rain, high humidity,
extreme temperature changes, or restricted ventilation.
Pointing up
Hurricane™ 1800 Flex User Manual Rev. 6
Hanging Clamp
N
!
OTE
C
.
LAMP IS SOLD SEPARATELY
Pointing down
Page 9 of 18
Advertisement
Table of Contents
