Table of Contents
Advertisement
4. O
PERATION
DMX Channel Summary
C
HANNEL
1
DMX Mode
This mode allows the unit to be controlled by any universal DMX controller. If you are
unfamiliar with DMX, please read the DMX Primer in the Appendix of this manual.
1.
2.
DMX Channel Values
C
HANNEL
1
Auto Cut-Off Feature
This product has an auto cut-off safety feature to keep the machine from becoming
damaged. This is referring to the operation of the pump. When the fluid tank is empty, the
pump will still operate for a short period of time, until all of the fluid has been removed
from the system. Then, it will sense that there is no fluid, and will automatically stop the
fog output. An indication that this has occurred is when the blue LED's that are lighting the
fluid tank are flashing.
·
This feature takes approximately 30 seconds to 1 minute to engage once the fluid
has emptied form the tank.
·
In order for the fog machine to automatically reset, the trigger must be released
either from the wired remote, wireless remote, the manual fog button on the unit, or
via a DMX controller. If the DMX controller is used, the DMX channel must be
brought to a value of 000 (0%) in order to allow the fog machine to reset itself.
·
Once the tank has been refilled with fog fluid, you may resume using the fog
machine. The auto cut-off will automatically reset.
Page 10 of 18
F
UNCTION
Fog output
This product will automatically switch to DMX mode operation, once a DMX
controller has been plugged into the 3-pin or 5-pin DMX input.
Use DIP switches 1~9 to set the DMX address.
V
F
ALUE
UNCTION
Fog output
000 ó 005
No function
006 ó 255
Fog output 0%~100%
Hurricane™ 1800 Flex User Manual Rev. 6
Advertisement
Table of Contents
