Table of Contents
Advertisement
Mounting
Orientation
Rigging
Mounting Diagram
Hurricane™ 901 User Manual Rev. 3
Before mounting this product, read and follow the safety recommendations indicated in
the Safety Notes section (page 2 of this manual).
The Hurricane™ 901 may be mounted in any position, provided there is adequate room
for ventilation around it.
Before deciding on a location for this product, always make sure that it will be easy to
access the unit for maintenance and fluid replenishment purposes.
Make sure that the structure or surface onto which you are mounting this product can
support its weight. Please see the Technical Specifications section of this manual for
weight information.
When mounting this product overhead, always use a safety cable. Mount the fixture
securely to a rigging point, whether an elevated platform or a truss.
When rigging this product onto a truss, you should use a mounting clamp of appropriate
weight capacity. The bracket has a 13 mm hole, which is appropriate for this purpose.
The bracket adjustment knobs allow for directional adjustment when aiming the product
to the desired angle. Only loosen or tighten the bracket knobs using your bare hands.
Using tools could damage the knobs.
The rubber feet allow for surface mounting. When mounting this fixture on the floor,
make sure that the fixture and its cables are away from people and vehicles. Refer to the
Safety Notes section (page 2 of this manual)
Clamp (not
included)
Mounting
bracket
Safety
loop
Mounting holes
Bracket
adjustment
knob
Page 7 of 14
Advertisement
Table of Contents
