Table of Contents
Advertisement
4. O
PERATION
Manual Local
Operation
Manual
Remote
Operation
Timer Remote
Operation
Page 8 of 14
To operate the Hurricane™ 901, do the following:
1) Plug the fog machine into power and turn the power switch to the fixture on.
2) Press <FOG> on the rear of the fog machine to trigger the fog output. The fog will
start.
3) Release the button to stop the fog output.
The Hurricane™ 901 comes with a wired
manual remote control (model FC-M). This
control allows the user to start and stop the fog
output.
To operate this product, follow the instructions
below:
1) Plug the fog machine into power and turn
the power switch to the fixture on.
2) Plug in the wired manual remote FC-M into
the Remote Control socket on the rear of
the fog machine.
3) Press <FOG> on the remote to trigger the
fog output. The fog will start.
4) Release the button to stop the fog output.
The Hurricane™ 901 unit may stop producing fog to allow for fluid reheating after
a period of continuous fog output. This is a normal occurrence.
The Hurricane™ 901 can operate with the
optional wired timer remote control (model
FC-T). This control allows the user to start and
stop the fog output manually, as well as to
operate the Hurricane™ 901 in timer mode.
To operate this product, follow the instructions
below:
1) Plug the fog machine into power and turn
the power switch to the fixture on
2) Plug in the wired timer remote FC-T into the
Remote Control socket on the rear of the
fog machine.
Timer operation
1) Press and latch <TIMER ON/OFF> on the
FC-T remote. The yellow LED should
illuminate.
2) Use the INTERVAL knob to adjust the time
between bursts of fog.
3) Use the DURATION knob to adjust the
duration of each burst of fog.
Continues on the next page
Hurricane™ 901 User Manual Rev. 3
Advertisement
Table of Contents
