Table of Contents
Advertisement
Static Colors
Custom Color
Mixing
Dimmer
Fan Settings
Page 18 of 23
To select a static color, do the following:
1.
Press <MENU> repeatedly until C-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select the desired preset color:
·
r (red)
·
g (green)
·
b (blue)
·
gb (cyan)
·
r b (magenta)
·
rg (yellow)
·
rgb (white)
4.
Press <ENTER>.
To custom mix a color, follow the instructions below:
1.
Press <MENU> repeatedly until U-- shows on the display.
2.
Press <ENTER> and one of the following colors shows on the display: rXXX (red),
gXXX (green), or bXXX (blue).
3.
Press <ENTER> repeatedly to select the desired color.
4.
Use <UP> or <DOWN> to select the desired color value (0–100).
NOTE: Selecting 0 will turn the color off.
5.
Press <ENTER> to select color value and continue to the next color.
6.
Repeat steps 3 to 5 until you create your desired color.
To select a dimmer mode, do the following:
1.
Press <MENU> repeatedly until dIM shows on the display.
2.
Press <ENTER> and one of the following shows on the display:
·
OFF (dimmer speed off)
·
dIM1 (dimmer, fast speed)
·
dIM2 (dimmer, medium speed)
·
dIM3 (dimmer, slow speed)
3.
Use <UP> or <DOWN> to select the desired dimmer mode.
4.
Press <ENTER>.
To select a fan setting, follow the instructions below:
1.
Press <MENU> repeatedly until FAN shows on the display.
2.
Press <ENTER> and either AUTO (fan automatically turns on) or HIGH
(fan always on) shows on the display.
3.
Use <UP> or <DOWN> to select the desired fan setting.
4.
Press <ENTER>.
CORE™ 3x3 User Manual Rev. 1
Advertisement
Table of Contents
