Mounting; Orientation; Rigging - Chauvet CORE User Manual

Mounting

Orientation

Rigging

Mounting Diagram
CORE™ 3x3 User Manual Rev. 1
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The CORE™ 3x3 may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
·
Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight (see the
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13-mm hole, which is appropriate for
this purpose.
·
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
·
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
·
When mounting the product on the floor, make sure that the product and cables are
away from people and vehicles.
Mounting Clamp
Bracket
Adjustment
Knobs
Technical Specifications).
Safety Cable
Hanging/Mounting
Bracket
Page 9 of 23