Static Colors; Custom Color Mixing; Selecting The Dimmer Mode; Infrared Remote Control - Chauvet SlimPAR User Manual

Static Colors

Custom Color
Mixing
Selecting the
Dimmer Mode
Infrared Remote
Control
Page 14 of 19
To select a preset static color, do the following:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER> and C 1—C 63 shows on the display.
3. Use <UP> or <DOWN> to select the desired preset color:
4. Press <ENTER>.
To custom mix a color, follow the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> and one of the following colors shows on the display: rXXX (red),
gXXX (green), bXXX (blue), AXXX (amber), WXXX (white), or PXXX (ultraviolet).
3. Press <ENTER> repeatedly to select the desired color.
4. Use <UP> or <DOWN> to select the desired color value (0–255).
NOTE: Selecting 0 will turn the color off.
5. Press <ENTER> to select color value and continue to the next color.
6. Repeat steps 3 to 5 until you create your desired color.
To select the dimmer mode, do the following:
1. Press <MENU> repeatedly until dIM shows on the display.
2. Press <ENTER> and one of the following shows on the display:
·
OFF (dimmer speed off)
·
dIM1 (dimmer mode 1, fast speed)
·
dIM2 (dimmer mode 2, middle speed)
·
dIM3 (dimmer mode 3, slow speed)
3. Use <UP> or <DOWN> to select the desired dimmer mode.
4. Press <ENTER>.
The SlimPAR™ HEX 3 IRC is fully compatible with the Infrared Remote Control (IRC)
from CHAUVET®. To enable use with the IRC, follow the instructions below:
1. Press <MENU> repeatedly until SET shows on the display.
2. Press <ENTER> and On (turns on the infrared sensor) or
OFF (turns off the infrared sensor) shows on the display.
3. Press <UP> or <DOWN> to select the desired option.
4. Press <ENTER>.
SlimPAR™ HEX 3 IRC User Manual Rev. 2