Using The Home Menu; Using The Sleep Timer; Setting The Display Brightness - Integra DTR-70.3 Instruction Manual

Using the Home Menu

The Home menu provides you quick access to frequently
used menus without having to go through the long
standard menu. This menu enables you to change settings
and view the current information.
The on-screen menus appear only on a TV that is
connected to the HDMI OUT MAIN. If your TV is
connected to other video outputs, use the AV
receiver's display when changing settings.
1 Press Receiver followed by Home.
The Home menu will be superimposed on the TV
screen.
2
Use / and Enter to make the desired selection.
■
Input
*1
You can select the input source while viewing the
information as follows: the name of input
selectors, input assignments, radio information,
and ARC function setting.
Press Enter to display the current input source,
followed by / to select the desired input
source. Pressing Enter again switches to the
selected input source.
■
Audio
You can change the following settings: "Sound
Program", "Bass (Front)", "Treble (Front)",
"Bass (Front Wide)", "Treble (Front Wide)",
"Bass (Front High)", "Treble (Front High)",
"Bass (Center)", "Treble (Center)", "Bass
(Surround)", "Treble (Surround)", "Bass
(Surround Back)", "Treble (Surround Back)",
"Bass (Subwoofer)", "Subwoofer 1",
"Subwoofer 2", "Center", "Dolby Volume",
"Audyssey", "Dynamic EQ
"Dynamic Volume
Optimizer", "Re-EQ", "Re-EQ(THX)", and
"Screen Centered Dialog".
See also:
• "Audyssey" (➔
• "Using the Audio Settings"
■
Video
You can change the following settings: "Wide
Mode" and "Picture Mode
See also:
• "Picture Adjust"
■
Info
*5
You can view the information of the following
items: "Audio", "Video" and "Tuner".
■
Listening Mode
You can select the listening modes that are
grouped in the following categories:
MOVIE/TV, MUSIC, GAME and THX.
Use / to select the category and
select the listening mode. Press Enter to switch
to the selected listening mode.
",
*2*3
", "Late Night", "Music
*2*3
page 56)
(➔ page 67)
".
*4
(➔ page 58)
/ to
Note
*1 For the Port input selector, the name of Universal Port
Option Dock will be displayed.
*2
"Dynamic EQ" and "Dynamic Volume" cannot be selected
when any of the THX listening modes is selected, with
"Loudness Plus" set to "On" or "Preserve THX Settings"
set to "Yes" (➔ page 52).
*3
When "Dynamic EQ" is set to "On" or "Dynamic Volume"
is set to anything else than "Off", "Dolby Volume" will be
switched to "Off" (➔ pages 56, 57).
*4 Only when you have selected "Custom" in the "Picture
Mode" (➔ page 58), pressing Enter allows you to adjust
the following items via the Home menu
"Contrast", "Hue" and "Saturation". Press Return to return
to the "Picture Mode" setting.
*5 Depending on the input source and listening mode, not all
channels shown here output the sound.

Using the Sleep Timer

With the sleep timer, you can set the AV receiver to turn
off automatically after a specified period.
1
Press Receiver followed by Sleep repeatedly to
select the required sleep time.
The sleep time can be set from 90 to 10 minutes in 10
minute steps.
The SLEEP indicator lights on the display when the
sleep timer has been set. The specified sleep time
appears on the display for about 5 seconds, then the
previous display reappears.
Tip
• If you need to cancel the sleep timer, press Sleep
repeatedly until the SLEEP indicator goes off.
• To check the time remaining until the AV receiver sleeps,
press Sleep. Note that if you press again on Sleep as the
time being displayed is equal or inferior to 10 minutes, the
sleep timer will go off.

Setting the Display Brightness

You can adjust the brightness of the AV receiver's
display.
1 Press Receiver followed by Dimmer repeatedly to
select:
• Normal
• Dim
• Dimmer
Tip
• (North American models) Alternatively, you can use the
AV receiver's Dimmer.
:
"Brightness",
En
41